T10A carbon tool steel
The strength and wear resistance of this steel are higher than T8 and T9, but the thermal hardness is low, hardenability is not high and quenching deformation is large. Suitable for the manufacture of poor cutting conditions, high wear resistance requirements, and not subject to sudden and violent vibration, the need for a certain toughness and a variety of tools with a sharp edge, such as turning tools, planing tools, drill bits, paper cutters, low precision and simple shape of the gauge (such as cardboard, etc.), can be used as wear-resistant parts not subject to large impact.
Classification: Strips for Aviation
Hotline:
T10A carbon tool steel
The strength and wear resistance of this steel are higher than T8 and T9, but the thermal hardness is low, hardenability is not high and quenching deformation is large. Suitable for the manufacture of poor cutting conditions, high wear resistance requirements, and not subject to sudden and violent vibration, the need for a certain toughness and a variety of tools with a sharp edge, such as turning tools, planing tools, drill bits, paper cutters, low precision and simple shape of the gauge (such as cardboard, etc.), can be used as wear-resistant parts not subject to large impact.
Main characteristics
General-purpose low hardenability cold work tool steel, advanced high carbon tool steel, the advantage is good machinability, cheap, easy to source, but poor hardenability, quenching deformation, because the steel contains few alloying elements, tempering resistance is low, and thus low load-bearing capacity. Although there is high hardness and wear resistance, but the small section workpiece toughness is not enough, large section section billet has the tendency of residual reticulated carbide.
The minimum heating temperature of globalization 740 ℃, the best isothermal temperature 690 ℃ -720 ℃, the emergence of lamellar carbide heating temperature 780 ℃, heated softening temperature 250 ℃, hardening depth of water quenching 15-18 mm, oil quenching 5-7 mm.
The steel is rough machined in annealed condition, then quenched and low temperature tempered to high hardness, and then finish machined. High wear resistance and mirror polishability are obtained. Low carbon martensite low temperature quenching is carried out to give high wear resistance and toughness, prevent and reduce deformation and cracking phenomenon.
Product
inquiry
If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.
WeChat Official Account
© COPYRIGHT 2022 Xinyu Yongli Strip Steel Co., Ltd. . ALL RIGHTS RESERVED | SEO Label | Power by 300.cn
